If your battery is not holding a charge or if you notice that your Macbook Air is running slow, try macbook air battery replacement. The procedure is simple and can be done in less than 15 minutes, depending on your computer experience.
To replace your battery, shut down your computer and remove the power cord from the wall outlet. Next, turn your Macbook Air over so you can see its bottom. If there is a sticker with a serial number, keep it safe, as you may need it later when ordering a new battery.
Find replacement parts
Once you have found your serial number, you can order a new battery. That will usually take around two weeks to arrive, but some online stores offer overnight shipping if you need it more quickly. Once the battery comes, remove all screws from the bottom of your MacBook Air using an appropriate screwdriver set. If you have never removed the screws before, this can be tricky. You should take off all of the screws underneath the laptop but leave any screw above the keyboard in place.
Now that you have taken out all of the screws and removed them from your MacBook Air, it is time to turn it over. You should see two cables connecting to the motherboard and several other wires running along your laptop’s top edge. You will need to remove these cables by unplugging them from their sockets on either side of the motherboard with a small Phillips-head screwdriver or flathead screwdriver. Make sure to keep all of these parts, as they are not interchangeable between models or years!
Shut down your computer
The battery likely needs replacing if your Macbook Air is on the fritz. To do this, you’ll need to open up your laptop and remove the old battery to insert a new one.
Shut down your Macbook Air. To do this, click on the Apple icon in the top left corner of your screen and then select Shut Down.
Next, remove your battery from your Macbook Air by pressing down on the latch and pulling it out of its slot. Finally, place the new battery into your laptop and reattach all screws that you removed earlier. Once you’re done, turn on your Macbook Air to check that everything works properly. If there are any issues, you may need to contact Apple or the seller of your battery for help.
Turn off the power and remove the battery from the backside of the laptop
After removing the screws that secure the back panel to your MacBook Pro, flip it over, so the keyboard faces up. Then, remove all of the screws from underneath the laptop by using a Philips screwdriver with a magnetic tip. Once you’ve done this, carefully lift on each side of your battery until it pops out.
Unscrew the battery from the bottom of the computer to remove it
Then, put your new battery into place by screwing it down to secure it. Once you’ve done this, flip your MacBook Pro back over so that the keyboard is facing up again. Then, put your back panel back on by screwing in all the screws. Finally, flip your MacBook Pro over again so that you can see the screen and make sure that everything is secure before closing it up.
If you have any questions about putting your battery back in, contact us at Tech Armor for help. Contact us at Tech Armor for assistance if you have questions about placing your battery back in.
Insert and screw in the new battery to the bottom of the laptop
If you are looking for macbook air battery replacement, the first step is to turn off your computer. Next, slide your finger under the battery and gently pull it out of its slot. Remove any screws that hold your old battery in place by using a Phillips screwdriver. Then, remove the old battery and set it aside.
Insert and screw in the new battery to the bottom of the laptop. Make sure to put the new battery in the same way you took out your old one and screw it down with four screws. Once you have it in, flip your computer and plug in the battery. Then, turn on your laptop to make sure everything is working correctly. If your computer doesn’t turn on, try pressing the power button again and ensure the battery is fully charged.
Re-insert the battery into the backside of the laptop by aligning pins and pressing down to snap it into place securely
If your laptop doesn’t turn on after replacing the battery, try pressing the power button again and ensure that the battery is fully charged. Then, turn on your laptop to make sure everything is working correctly.
Re-insert the memory module into its slot by lining up the notch on the module with its corresponding notch on the motherboard. When you push it in, it will click into place securely. If you need to disconnect or remove a SODIMM memory module from your computer, pull it out by pressing it on one end of the module while pulling it up on the other.
Power up your computer and test the new battery’s performance and lifespan
If your laptop starts up, the problem is likely with the AC adapter or power cord and not a new battery. If there are no lights on your computer, try pressing the power button again and ensure the battery is fully charged. Then, turn on your laptop to make sure everything is working correctly.
Conclusion
Macbook air battery replacement is straightforward, although it may vary depending on your model. Some batteries are held in place by screws, for example, and some attach more easily through pressure. But no matter what, replacing the battery is not a do-it-yourself project. If you suspect the battery is failing, call Applecare or visit an Apple store to get professional help.
