Too many bathroom taps may be an insignificant part of your bathroom. But these can have a huge impact on overall looks. Therefore, replacing it with a modern tap can be the quickest way to spruce up your bathroom.
Our buyer’s guide covers every aspect of the information you need for purchasing the taps.
Types of Bathroom Taps
Most Pillar taps have two handles, one for hot and one for cold water. This lets you mix to achieve the desired temperature. Some of these also have a third handle that controls the flow rate. This can be useful if you want to conserve water or fill a sink quickly.
There are some faucets are designed to be mounted on the wall, while others are designed to be either floor- or deck-mounted. Wall-mounted taps can be a preference if you want to create a more spacious look in your bathroom, as they take up less counter space. Floor-mounted taps are an option if you have a large bathroom with plenty of counter space. The one on the deck is preferable if you want to create a seamless look in your bathroom, as they can be mounted directly onto your bathroom countertop.
Considerations Before Purchasing Bathroom Taps
Deciding which bathroom tap to buy can be a daunting task. With all of the different brands, materials, and styles on the market, it’s hard to know where to start. However, there are a few key considerations that can help narrow down the field and make the decision-making process a little easier.
- First, think about the type of bathroom sink you have. This will windowscage determine the number and placement of holes for the taps.
- Next, consider your budget and decide how much you’re willing to spend. Keep in mind that more expensive doesn’t always mean better quality; there are plenty of great options available at mid-range prices.
- Finally, think about the style of taps you want. Do you want something classic or modern? Sleek and minimalistic or ornate and decorative? Once you’ve considered these factors, you’ll be well on your way to finding the perfect bathroom tap for your home.
Is DIY For a Bathroom Taps Possible?
Regardless of the primarily held belief, the installation of taps is a fairly simple task. A trip to the hardware store can be an intimidating experience, especially if you’re not sure what you’re looking for. When it comes to plumbing, most people just assume it’s best to leave it to the professionals. However, there are a few simple projects that even the most novice do-it-yourselfer can tackle with confidence and replacing a faucet is one of them. With just a few basic tools and a little bit of know-how, you can easily install a new tap in your bathroom sink or bath. Plus, you’ll save yourself a significant amount of money in the process. So next time your faucets start to leak, don’t reach for the phone book – go for your toolbox instead.
Step By Step DIY Installation Process?
- Before you begin, make sure you have all the necessary tools and materials. You will need a basin wrench, a pipe wrench, pliers, a putty knife, Teflon tape, and an adjustable wrench. You should also have a new faucet installed. Once you have everything you need, follow these steps:
- Turn off the water at the shut-off valve. This is usually located underneath the sink.
- Use the putty knife to remove any old plumber’s putty from around the base of the tap.
- Unscrew the mounting nuts from the underside of the sink with the basin wrench or pipe wrench.
- Carefully pull the tap out of the sink. If it is difficult to remove, you may need to use pliers.
- Inspect the faucet holes in the sink. If they are corroded or damaged, they will need to be repaired before you install the new tap.
- Wrap Teflon tape around the threaded shanks of the new bathroom faucets.
- Insert the new tap into the sink and screw on the mounting nuts by hand. Tighten them with a wrench until they are snug but not overly tight – you don’t want to strip the threads.
- Open up the shut-off valves and turn on the water at the supply lines.
- Check for leaks by running both handles of the bathroom tap.” if there are no leaks, congratulations – you’ve just successfully installed a new faucet!
Maintenance and Cleaning of Taps
Bathroom taps can quickly become clogged with dirt and grime, making them difficult to use. Fortunately, there are a few simple steps that can be taken to keep taps clean and functioning properly.
- First, it is important to regularly wipe down the outside of the tap to remove any build-up of dirt or grime.
- Second, the inside of the tap should be cleaned regularly with a soft cloth or brush.
- Finally, it is important to check the taps for leaks regularly, as even a small leak can cause extensive damage over time. By following these simple steps, you can help to ensure that your taps stay clean and working properly for years to come.
