Choosing the best style and design for plastic wood awnings is one of the most important decisions you’ll make. Whether you’re planning to buy or build, there are a few steps you’ll need to follow in order to get the most out of your new outdoor accessory.
1.Measure from the wall to the farthest point
Whether you are looking to put up a new awning or awning replacement, you’ll want to start with the basics such as a measuring device and a good ol’ fashioned ruler. After you’ve measured up, the real fun begins. You’ll need to mark stud locations on your siding in order to get the job done right. You’ll also need to fill in the holes with exterior grade wood filler. The final product is an eye-catching awning that will serve you for many years to come. You can even leave it up during the winter if you’re feeling particularly festive.
In addition to measuring your walls, you’ll need to plan your awning route in advance. While you’re at it, you’ll want to consider which windows and doors to cover.
2.Install awning bracing from inside walls
Adding bracing to an awning is a good idea to provide structural support. Typically, awnings have diagonal bracings running from the wall to the front of the awning. They add about 3 inches to the width of the awning.
Before you install awning bracing, you will need to mark the studs on the exterior of your home. The studs are typically 16 inches apart, although they may be closer or farther apart in older homes. You may need a stud finder. You will also need a spirit level to make sure that the ledger board is level.
Once you have marked the studs, you can start drilling the holes. Use a spiral masonry drill bit to drill the holes. The hole should be about 6 inches deep.
3.Install fender washers behind the wall brackets
Using fender washers to mount a bracket is the logical next step after drilling the requisite holes. This will help ensure your awning will be a sturdy and durable piece of construction. The benefits of using fender washers are many and include: – Sturdy, long lasting – Non-corrosive – Reduced risk of sagging – Better protection against rain and weather – Reduced chance of damaging your awning – Stackable, not to mention a good fit.
Installing fender washers isn’t for the faint of heart. It requires a little finesse and patience. Luckily, there are a few options available for the job. For example, there are fender washers that come in various sizes and styles. Some manufacturers even provide custom made ones. This is especially helpful if you are using your awning on a tight schedule or if you aren’t an amateur carpenter.
4.Proper spacing of rafters for awnings
Whether you are building a pergola or awning, it is important to understand the proper spacing of rafters. Generally speaking, you want to have your rafters spaced about 12 inches apart. However, if you are building a pergola, you want your rafters to be spaced at least 15 inches apart.
To determine the proper spacing of rafters, you will need to measure the area of your pergola or awning. Once you have measured your area, you will need to divide the width by 16. For example, if your pergola is 14 feet wide, you will need 15 rafters. You will need to space them at least 16 inches from the center of the last rafter.
You will also need to determine the distance from your house to the point where you will mount your awning. A standard awning will be about eight feet wide. This will give you plenty of room for your awning.
5.Backer material for awnings
Choosing the right backing material for your plastic wood awning is not as simple as it sounds. You should consider a variety of factors including your budget, the location of the awning, and the materials used to construct your building. You may also want to consider the size and shape of your awning.
You can choose from a wide range of backer materials including plywood, OSB, and shiplap. Using a backing material that is heavy duty and flexible enough to hold the weight of your awning should be a priority. If you are unsure of the proper material to use, you can always ask the manufacturer for Buy Software Online In Dubai a recommendation.
The most efficient way to install a backer material is to drill holes in the building’s wall. This will allow you to use lag bolts to mount wall brackets for your awning. You should also make sure that the awning is properly caulked to prevent moisture from seeping into the mounting holes.
Source : تركيب مظلات